Welcome to MorphOS-Storage, a webserver dedicated to MorphOS users. ©2016-2024 Meta-MorphOS.org
LHArchiver_1.11.lha
Description:Create lha archives intuitively
Developer/Porter:Bernd Assenmacher
Mail:
Readme:
Short: create lha archives intuitively
Kurz: intuitiv lha Archive erstellen
Author: Bernd Assenmacher
Uploader: b-a@keemail.me (Bernd Assenmacher)
Version: 1.11
Replaces: util/arc/LHArchiver.lha
Requires: see guide file
Type: util/arc
Architecture: m68k-amigaos; ppc-amigaos; ppc-morphos


This little tool aims to create lha archives intuitively, easy and fast.

See the guide file for details. :-)

LHArchiver is "EmailWare" ;-) and free to use without any restrictions !!

If you use it and like the idea behind it :

Just send an email to : b-a(at)keemail.me
You will get a reply email with a keyfile registered in your chosen name. :-)
(Just choose any "name" you wish to be shown registered as in your email)

And yes...it's yours for free...!! Donations are always gratefully received

Btw :
Programming software is a very time intense process so if you want you can
support it/me by sending a small donation here :

https://www.paypal.com/donate/?hosted_button_id=T72XXT56G6KFJ

Thank you and happy archiving...

History :

1st April 2022 --- V1.0 - initial release

15th May 2022 --- V1.1 - improved version

changes :

- updated to new version number 1.1
- centred requesters (as accurately as I could ;-))
- gave default name of "file" to lha file for creating/modifying (editable)
- added requesters when the choice of drawers conflicted with the inputs
- mapped the drives "Workbench:" and "System:" to "sys:"
- set source drawer to default "sys:"
- set destination drawer to default "ram:"
- fixed some minor quirks


29th May 2022 --- V1.2 - improved version (again ;-))

changes :

- updated to new version number 1.2
- added "alarm" beep/flash when conflicting values entered in requesters
- added possible free @{"registration" link "Document_7" 0}
- CONsole output for AmigaOS4.x now works
- changed some code to optimise things
- you may @{"donate" link "Document_7" 0} now ;-)
- added installer script


28th June 2022 --- V1.3 - improvement continues ...

changes :

- updated to new version number 1.3
- now maps the name of the system drive as "sys:"
(no longer needs to be "Workbench" or "System")
- improved CONsole output
- now possible to configure a console window via tooltypes (position & size)
- fixed assign issue that allowed writing of an archive in the source folder
- now catches incorrectly entered values in requesters (stops app crashes)
- entering ".lha" at the end of an archive filename is no longer possible
- optimised requester code
- changed information windows to offer a system standard appearance
- program checks to ensure there is enough space on chosen destination drive
- small changes to installer script


13th August 2022 --- V1.4 - next steps

changes :

- updated to new version number 1.4
- english guide file enhanced
- added German and French language
(depends on adjusted system language in Preferences)
Default stays English when another language is chosen
than the supported ones.
- added german guide file


4th September 2022 --- V1.5 - the journey is the destination

changes :

- updated to new version number 1.5
- Selection buttons adapted to languages
- added italian language
- added italian guide file
- added tooltype to approach the RAM situation.
(if activated the RAM disk will not be checked for enough space available.
So users which have shown their RAM disk as 100% full nevertheless
can create archives there. Be informed that in case of not having enough
space available there the process will fail. To activate just remove the
parentheses around the "Ram=1" tooltype and save it to the icon.
The value "1" must not be changed)
- installer script now creates a subdrawer called "LHArchiver" and copys
the files to that drawer


22nd December 2022 --- V1.6 - enhancement strikes again

changes :

- updated to new version number 1.6
- changed progress indicator to show percentage on console output
- lha arguments/options slighly changed for better handling
- removed requester for lha extension warning.
Its now handled through lha itself completely to add *.lha extension.
So if *.lha is entered in the filerequester it is just taken.
- added possibility to archive a whole drive through tooltype setting
(archive_drive=1). To do so just remove the parentheses around the
"archive_drive" tooltype and save it to the icon. The value "1" must not
be changed. Be informed that most Amiga filesystems can only handle a
filesize of max 2 GB (MorphOS can do 4GB max with the inbuild SFS). So be
sure to use a filesystem on the destination drive which can handle more if
your LHA archive grows bigger than that (e.g.Ice-FS). In generell it is not
recommended to create archives >2GB. During my tests I realized that LHA
itself has problems when adding files to an existing archive and it grows
bigger than 2GB. Older archiving tools could have problems with
archives >2GB too.
If you activate archiving of drives it is also recommended to activate
the "H2/lh6" tooltype. (see next lines) - added tooltype to activate H2 and
lh6 options. To do so just remove the parentheses around the "H2/lh6"
tooltype and save it to the icon. The value "1" must not be changed.
This should solve problems with longer filenames (H2-> header Level 2) and
activates the newer and better lh6 compression (see lha manual).
If you do not activate this header level 1 and lh5 compression is used.


23rd December 2022 --- V1.7 - fast fix

changes :

- updated to new version number 1.7
- fixed an issue which caused AmigaOS3.x and AmigaOS4.x to open a second
(empty) console window (thanks Nikos :-))


24th January 2023 --- V1.8 - further steps

changes :

- updated to new version number 1.8
- added tooltype "(REQUIREPLUGINS=PLANANARAMA)" to the "LHArchiver_OS3" icon.
This tooltype activates the plananarama plugin when removing
the parentheses around and it is then saved to the icon.
The Plananarama plugin has to be installed on the system before.
You can find it on Aminet here :
http://aminet.net/dev/hwood/HWP_Plananarama.lha
or on the Hollywood Project website.
In particular you need the file : "plananarama.hwp" in "Libs:hollywood"
This is only for AmigaOS3.x systems without graphics cards since LHArchiver
was only running on systems with graphics cards.
- added LHArchiver as Hollywood applet "LHArchiver.hwa" for use with
Hollywood player. Be informed that tooltypes will not work here.
- improved icon handling. The name of the binary and its icon can be changed
to "LHArchiver" or just left as it is with the OS specification.


1st May 2023 --- V1.9 - additions

changes :

- updated to new version number 1.9
- added tooltype "(sfx=1)". This tooltype activates the creation of self
extracting archives with the extension ".run". To do so just remove the
parentheses around the tooltype and save it to the icon. The value "1" must
not be changed. If this is used the "H2/lh6" tooltype will not work even it
is set, because this works only with "lh5" compression and on AmigaOS3/4
with Header 0. LHArchiver will do the necessary settings automatically if
it is activated which means on MorphOS lha operates with Header 1 and lh5
compression and on AmigaOS3/4 it will create the archive with Header 0 and
lh5 compression. The tool "LhASfx" has to be copied to "sys:c".
Explanation: On AmigaOS3/4 there is obviously a limitation/bug with
"LhASfx" and "LhA". If a selfextracting archive is created there one
should not include any drawers containing files into the archive unless
header 0 is used. Otherwise the selfextract process of the ".run" archive
will fail with an error (archive corrupted) or drawers (and files in it)
are missing. It is recommended (on AmigaOS3/4) not to archive files with
too long filenames when "sfx=1" is used, because that could cause problems
due to the limitations of header 0. On MorphOS it should be better with
header 1, but it has limitations there too.
- improved icon handling again. The name of the binary (and its icon) can be
now : "LHArchiver" or just left as it is with the OS specification or
"LHArchiver.hwa". So the tooltypes of the applet will work now too. :-)
Be aware that only one (icon) of them should be in the drawer you start
LHArchiver from or it could be confused from which icon to take the
tooltypes.


14th May 2023 --- V1.10 - tuning

changes:

- updated to new version number 1.10
- added greek language
- added spanish language
- added tooltypes "FileReqX" and FileReqY"
With those tooltypes one can adjust the window position from the file
requester. This works relativ to its initial position. To activate it the
parentheses need to be removed and the value has to be set. When
saved to the icon it will move the requester window as set next time
LHArchiver is launched.
e.g. :
"FileReqX=-200" will move it 200 pixels to the left and
"FileReqX=200" will move it 200 pixels to the right.
"FileReqY=-200" will move it 200 pixels up and
"FileReqY=200" will move it 200 pixels down.

This should only be used to finetune the position of the requester and
is dependant on the used resolution of the screen.
These tooltypes do not work on AmigaOS4.x for some reason.


28th May 2023 --- V1.11 - fixing

changes:

- updated to new version number 1.11
- updated languages
- now checking if LHA is installed on AmigaOS3.x
- now checking if LhASfx is installed when sfx tooltype is activated
- fixed guide issue so that older versions of multiview should work now
(Thanks to Nuno Costa ;-))

*********************************************************************

This readme file was made with Aminetreadmemaker from Thomas Igracki

*********************************************************************


Paypal:
Upload Date:May 28 2023
Category:Files/Archive
Download:LHArchiver_1.11.lha
Md5:e0d8e8ebc37eb8b974c2d68cd18f7e3b
Size:1 MB
Downloads:275
Screenshot(s)
 
History
Last Comments